The variable microporous aerator is designed with a slightly raised arch surface and is made of ABS engineering plastic. The diaphragm has a special imported rubber (EPDM) with anti-adhesion surface, which is made by special processing, and the diaphragm opening is made of CNC cutter imported from Germany to ensure the quality and accuracy of the hole. When the aerator is oxygenated and aerated in, four air supply grooves are designed on the main disc surface, so that the incoming air can be buffered through the check valve and directly sent to the center of the aeration head to ensure that the diaphragm can be easily opened with low resistance at one time. The diaphragm is mechanically assembled with ribbed anti-lock to ensure that the diaphragm never falls off. When the air is intake, the micropores on the air film bulge and open by themselves to ensure the passage of air. When the aeration is stopped, the variable micropores on the air film are closed, and the variable pores of the air film expand and contract by themselves, so as to avoid the phenomenon of blocking the micropores through the aerator. Secondly, the chassis of the aerator is equipped with a check valve device, which prevents the mixed liquid from entering the gas distribution branch pipe when the pipeline system stops the air supply, so that the mixed liquid can be avoided from entering the branch pipe and being blocked. The incoming air does not need special filtration, intermittent aeration is not blocked, and the variable microporous aerator is widely used to blow the air film and tear the film and can not open the diaphragm or the diaphragm is blocked to make great technical improvements, these technical reforms make it free from the pain of maintenance in long-term operation, and it is a new generation of excellent products.











